Energy Saver in Delhi
Energy Saving means
decreasing the amount of energy used while achieving a similar outcome of end
use. Using less energy has lots of benefits – you can save money and help the
environment. Generating energy requires precious natural resources, for
instance coal, oil or gas.
- · Money Savings – You can reduce the cost of your heating, electricity and fuel bills.
- · Lessened Impact on the Land and Healthier Environment – Lower energy usage results in decreased pollution.
Option
1: Renewable Energy Sources
Tubular
solar heating systems can be used if the outlet temperature requirement is upto
60 deg.C. If Outlet temperature is more, parabolic solar thermal solutions are
worth considering. Solar thermal solutions can produce temperature upto 400 deg.C.
if one uses thermic fluid. Nowadays, solutions are available which will
automatically source shortfall of heat energy from existing heating equipment
such as electrical heaters or boilers if solar energy is insufficient.
Option
2: Use of waste heat recovery
Many
industrial applications such as furnace, boilers emit hot exhaust gases. Heat
contained in the flue gases can be extracted using heat exchangers & in
turn will be utilised in other heating requirements. e.g. Combustion air
supplied to boiler can be preheated by boiler flue gasses, which increases
boiler efficiency.
Option
3: Use of heat pump
Mechanical
heat pump is equipment based on Thermodynamic principle. The cycle generates
heat along with cooling effect. It is evident from the experience that an air
conditioner generates cooling effect in a room & heating effect outside the
room. So, using the same principle, if one uses heat pump instead of electrical
heating in a heating process, there is a potential to 30% energy
saver. By product of heating through heat
pump is cooling, which one can use for cooling process. So, if a process
requires both, heating & cooling; then heat pump can save energy upto
whooping 70%, when compared with electrical heating.
Option
4: Geothermal heat pump
A
geothermal heat pump or ground source heat pump (GSHP) is a central heating
and/or cooling system that transfers heat to or from the ground.
It
uses the earth as a heat source (in the winter) or a heat sink (in the summer).
This design takes advantage of the moderate temperatures in the ground to boost
efficiency and reduce the operational costs of heating and cooling systems and
may be combined with solar heating. Ground source heat pump exchanges heat with
the ground. This is much more energy-efficient because underground temperatures
are more stable than air temperatures through the year.
GreenMagic is a series of innovative
energy saving products, certified and promoted by a team of experienced
industrial profession and energy auditors. We provide energy audit services and
energy conservation training, having 75 years of cumulative experience in
industrial energy audit services and energy conservation training.
All
greenmagic products are chosen on the basis of not only energy savings, but
also product quality, after sales support and reliability.You can be rest
assured about the long lasting benefits of energy saving by choosing
greenmagic.
For
more information contact us :- +91 - 253
- 6614302 / 6602766 / 6603022
Comments
Post a Comment